Record the current wireless computer settings- Page 68

Wireless configuration for Macintosh

®

 54

5

11

To communicate with the un-configured wireless 
machine, temporarily change the wireless settings 
on your Macintosh

®

 to match machine’s default 

settings shown on this screen. Click Next.

12

If more than one wireless machine is available on 
the network, the following list appears. If the list is 
blank, check that the access point and the machine 
are powered on, and then click Refresh. Choose the 
machine you wish to configure, and click Next.

Note

The Default Node name of the NC-xxxx (where “xxxx” is 
your model name) is “BRW_xxxxxx” (where “xxxxxx” is the last six digits of Ethernet address).

Item

Record the current wireless computer settings

Communication mode:
(Infrastructure/Ad-hoc)

Channel: (1-14)

Network name
(SSID/ESSID)

Authentication method
(Open system/Shared key)

Encryption:
(None/WEP/WPA/WPA2-PSK/
LEAP)

Encryption key: