Record the current wireless computer settings- Page 77

Wireless configuration for Macintosh

®

 63

5

10

To communicate with the un-configured wireless 
machine, change the wireless settings on your 
Macintosh

®

 to the machine’s default settings which 

are shown on the screen. Click Next.

11

If more than one wireless machine is available on 
the network, the following list appears. If the list is 
blank, check if the machine is powered on, and then 
click Refresh. Choose the machine you wish to 
configure, and click Next.

Note

The Default Node name of the NC-xxxx (where “xxxx” is your model name) is “BRW_xxxxxx” (where “xxxxxx” 
is the last six digits of Ethernet address).

Item

Record the current wireless computer settings

Communication mode:
(Infrastructure/Ad-hoc)

Channel: (1-14)

Network name
(SSID/ESSID)

Authentication method
(Open system/Shared key)

Encryption:
(None/WEP/WPA/WPA2-PSK/
LEAP)

Encryption key: