Introduction; Power Cord; Follow these guidelines to avoid fire, electric shock, or other damage.- Page 16

Introduction

1

16

Follow these guidelines to avoid fire, electric shock, or other damage.

Power Cord

Use only the authorized power source (120V AC) for the machine.

Use only the power cord included with the machine.

Do not handle the power cord or plug if your hands are wet.

Do not overload the electrical outlet sockets with too many appliances or plug the power 
cord into a damaged electrical outlet.

Do not cut, damage, alter or place heavy objects on the power cord.

Do not use the power cord if it is damaged.

Ensure the power cord is correctly inserted into the electrical outlet.

Always hold the power cord when unplugging the power cord from or plugging it into 
electrical outlet. Do not pull on the power cord. The wire in the electrical cord may become 
damaged.

If the machine will not be used for an extended period, remove the power cord from the 
electrical outlet.

Cutter

Do not touch the blade of the cutter.

Do not open the top cover when the cutter is operating.

 CAUTION

Follow these guidelines to avoid fire, electric shock, or other damage.

Installation/Storage

Put the machine on a flat, stable surface such as a desk.

Do not put any heavy objects on top of the machine.

DK Roll (DK Label, DK Tape)

Be careful not to drop the DK Roll.

DK Rolls use thermal paper and thermal film. Both the label and print will fade with sunlight 

and heat. Do not use DK Rolls for outdoor use that requires durability.

Depending on the area, material, and environmental conditions, the label may unpeel or 

become irremovable, the color of the label may change or be transferred to other objects.

Before applying the label, check the environmental condition and the material. Test the 

label by affixing a small piece of it to an inconspicuous area of the intended surface.

 WARNING