Driver Information Center (DIC) (If Equipped)- Page 149

2-84

Press the GAGE INFO button until the display
shows BATTERY STATE. If the voltage is normal
the display will show BATTERY STATE NORMAL.
If the voltage drops below 10.5 volts, the display will
show BATTERY STATE LOW. If the voltage is
above 16.2 volts, the display will show BATTERY
STATE HIGH. If the display shows the high or low
message, you need to have your battery and charging
system checked.

Press the GAGE INFO button until OIL LIFE
INDEX appears in the display. The OIL LIFE
INDEX NORMAL display will show an estimate 
of the oil’s remaining useful life. When the oil life
index is less than 10%, the display will show OIL
LIFE INDEX CHANGE OIL. When you have the 
oil changed according to the maintenance schedule
(see “Maintenance Schedule” in the Index), you 
will have to reset the oil life monitor. To reset the 
Oil Life System (Index), see “Oil Life System” 
or “Engine Oil, When to Change” in the Index.

Press the GAGE INFO button until TIRE PRESSURE
appears in the display. TIRE PRESSURE NORMAL 
is displayed when the Check Tire Pressure System
believes your vehicle’s tire pressures are normal. If a
potential tire pressure problem is detected, the display
will show CHECK TIRE PRESSURE. If you see the
CHECK TIRE PRESSURE message, you should stop
as soon as you can and check all your tires for damage.
(If a tire is flat, see “If a Tire Goes Flat” in the Index.)
Also check the tire pressure in all four tires as soon as
you can. See “Inflation 

--

 Tire Pressure” and “Check

Tire Pressure System” in the Index. There are times
when you will have to reset (calibrate) the Check Tire
Pressure System. See “Check Tire Pressure System” 
in the Index.

D

RESET: This button, used along with other buttons,
will reset system functions.

D

ENG/MET: Use this button to change the display
between English and metric units.