Do not cover a headlamp to improve beam; off when aiming. Covering a headlamp may; cause excessive heat build- Page 308

6-38

4. Turn on the low beam headlamps and place a piece of

cardboard or equivalent in front of the headlamp not
being aimed. This should allow the beam cut

-

off of the

headlamp being aimed to be seen on the flat surface.

NOTICE:

Do not cover a headlamp to improve beam
cut

-

off when aiming. Covering a headlamp may

cause excessive heat build

-

up which may cause

damage to the headlamp.

5. Turn the vertical aiming screw (C) until the

headlamp beam is aimed to the horizontal tape line.