— Battery Charge Warning Light;  — Coolant Temperature Warning Light;  — Electronic Throttle Control (ETC) Warning Light- Page 195

2018 Jeep Wrangler JK Owner Manual

Table of Contents

GETTING TO KNOW YOUR VEHICLE
GETTING TO KNOW YOUR INSTRUMENT PANEL
SAFETY
OCCUPANT RESTRAINT SYSTEMS
STARTING AND OPERATING
SERVICING AND MAINTENANCE
MULTIMEDIA
UCONNECT PHONE — IF EQUIPPED
background image

— Battery Charge Warning Light

This warning light will illuminate when the battery is not

charging properly. If it stays on while the engine is run-

ning, there may be a malfunction with the charging system.

Contact an authorized dealer as soon as possible.
This indicates a possible problem with the electrical system

or a related component.

— Coolant Temperature Warning Light

This light warns of an overheated engine condition. If the

light turns on while driving, safely pull over and stop the

vehicle. If the A/C system is on, turn it off. Also, shift the

transmission into NEUTRAL and idle the vehicle. If the

temperature reading does not return to normal, turn the

engine off immediately and call for service.

NOTE:

As the coolant temperature gauge approaches

H,

this indicator will illuminate and a single chime will sound.

— Electronic Throttle Control (ETC) Warning

Light

This warning light will illuminate to indicate a problem

with the Electronic Throttle Control (ETC) system. If a

problem is detected while the vehicle is running, the light

will either stay on or flash depending on the nature of the

problem. Cycle the ignition when the vehicle is safely and

completely stopped and the transmission is placed in the

PARK position. The light should turn off. If the light

remains on with the vehicle running, your vehicle will

usually be drivable; however, see an authorized dealer for

service as soon as possible.

NOTE:

This light may turn on if the accelerator and brake

pedals are pressed at the same time.
If the light continues to flash when the vehicle is running,

immediate service is required and you may experience

reduced performance, an elevated/rough idle, or engine

stall and your vehicle may require towing. The light will

come on when the ignition is placed in the ON/RUN or

ACC/ON/RUN position and remain on briefly as a bulb

check. If the light does not come on during starting, have

the system checked by an authorized dealer.

— Oil Pressure Warning Light

This warning light will illuminate to indicate low engine

oil pressure. If the light turns on while driving, stop the

vehicle, shut off the engine as soon as possible, and contact

an authorized dealer. A chime will sound when this light

turns on.

4

GETTING TO KNOW YOUR INSTRUMENT PANEL

193

Detailed Information for 2018 Jeep Wrangler JK Owner Manual

Related Documents for 2018 Jeep Wrangler JK Owner Manual