TPMS Deactivation — If Equipped- Page 227

2018 Jeep Wrangler JK Owner Manual

Table of Contents

GETTING TO KNOW YOUR VEHICLE
GETTING TO KNOW YOUR INSTRUMENT PANEL
SAFETY
OCCUPANT RESTRAINT SYSTEMS
STARTING AND OPERATING
SERVICING AND MAINTENANCE
MULTIMEDIA
UCONNECT PHONE — IF EQUIPPED
background image

each subsequent ignition switch cycle, a chime will

sound, the TPMS Warning Light will flash on and off for

75 seconds and then remain on solid, and the instrument

cluster will display a

SERVICE TPM SYSTEM

message

for a minimum of five seconds and then display dashes

(- -) in place of the pressure value.

Once you repair or replace the original road tire, and

reinstall it on the vehicle in place of the spare tire, the

TPMS will update automatically.

In addition, the TPMS Warning Light will turn OFF and the

graphic in the instrument cluster will display a new

pressure value instead of dashes (- -), as long as no tire

pressure is below the low-pressure warning limit in any of

the four active road tires. The vehicle may need to be

driven for up to 20 minutes above 15 mph (24 km/h) in

order for the TPMS to receive this information.

TPMS Deactivation — If Equipped

The Tire Pressure Monitoring System (TPMS) can be deac-

tivated if replacing all four wheel and tire assemblies (road

tires) with wheel and tire assemblies that do not have

TPMS Sensors, such as when installing winter wheel and

tire assemblies on your vehicle.

To deactivate the TPMS, first, replace all four wheel and

tire assemblies (road tires) with tires not equipped with

Tire Pressure Monitoring (TPM) Sensors. Then, drive the

vehicle for 20 minutes above 15 mph (24 km/h). The TPMS

will chime, the TPMS Warning Light will flash on and off

for 75 seconds and then remain on. The instrument cluster

will display the “SERVICE TPM SYSTEM” message and

then display dashes (--) in place of the pressure values.
Beginning with the next ignition cycle, the TPMS will no

longer chime or display the “SERVICE TPM SYSTEM”

message in the instrument cluster but dashes (--) will

remain in place of the pressure values.
To reactivate the TPMS, replace all four wheel and tire

assemblies (road tires) with tires equipped with TPM

sensors. Then, drive the vehicle for up to 20 minutes above

15 mph (24 km/h). The TPMS will chime, the TPMS

Warning Light will flash on and off for 75 seconds and then

turn off. The instrument cluster will display the “SERVICE

TPM SYSTEM” message and then display pressure values

in place of the dashes. On the next ignition cycle the

SERVICE TPM SYSTEM

message will no longer be dis-

played as long as no system fault exists.

5

SAFETY

225

Detailed Information for 2018 Jeep Wrangler JK Owner Manual

Lists of information found in 2018 Jeep Wrangler JK Owner Manual - Page 227

  • Once you repair or replace the original road tire, and reinstall it on the vehicle in place of the spare tire, the TPMS will update automatically.

Related Documents for 2018 Jeep Wrangler JK Owner Manual