Rearming The System; To Arm The System; To Disarm The System- Page 28

2018 Jeep Wrangler JK Owner Manual

Table of Contents

GETTING TO KNOW YOUR VEHICLE
GETTING TO KNOW YOUR INSTRUMENT PANEL
SAFETY
OCCUPANT RESTRAINT SYSTEMS
STARTING AND OPERATING
SERVICING AND MAINTENANCE
MULTIMEDIA
UCONNECT PHONE — IF EQUIPPED
background image

NOTE:

The Panic Alarm and the vehicle security alarm are

quite different. Please take a moment to activate the Panic

Alarm and the vehicle security alarm to hear the differ-

ences in the horn. In case one should go off in the future,

you will need to know which mode has been activated in

order to deactivate it.

Rearming The System

If something triggers the alarm, and no action is taken to

disarm it, the vehicle security alarm will turn off the horn

after three minutes, turn off all of the visual signals after 15

minutes, and then the vehicle security alarm will rearm

itself.

To Arm The System

The vehicle security alarm will set when you use the

Remote Keyless Entry key fob to lock the doors and swing

gate, or when you use the power door lock switch while

the door is open. After all the doors are locked and closed,

the vehicle security light (located on the instrument cluster)

will flash rapidly for about 16 seconds to signal that the

vehicle security alarm is arming. During this 16-second

arming period, opening any door or the swing gate will

cancel the arming. If the vehicle security alarm is success-

fully set, the vehicle security light will flash at a slower rate

to indicate the vehicle security alarm is armed.

To Disarm The System

To disarm the vehicle security alarm, you will need to push

the unlock button on the key fob, or turn the ignition

switch to the ON/RUN position. If something has trig-

gered the vehicle security alarm in your absence, the horn

will sound three times, and the exterior lights blink three

times when you unlock the doors. Check the vehicle for

tampering.
The vehicle security alarm is designed to protect your

vehicle; however, you can create conditions where the

vehicle security alarm will arm unexpectedly. If you remain

in the vehicle and lock the doors with the key fob, once the

vehicle security alarm is armed (after 16 seconds), when

you pull the door handle to exit, the alarm will sound. If

this occurs, push the unlock button on the key fob to

disarm the vehicle security alarm. You may also acciden-

tally disarm the vehicle security alarm by unlocking the

driver’s door with the key and then locking it. The door

will be locked but the vehicle security alarm will not arm.

26

GETTING TO KNOW YOUR VEHICLE

Detailed Information for 2018 Jeep Wrangler JK Owner Manual

Related Documents for 2018 Jeep Wrangler JK Owner Manual