Setting Toll Saver; ICM Recording Monitor; Recording a Conversation- Page 71

M E S S A G E   C E N T E R      

9 - 6

Setting Toll Saver

When you set the toll saver feature, the FAX/MFC answers after four rings if you don’t 
have messages, and after two rings if you do have messages. This way, when you call 
the FAX/MFC, if it rings three times, you know you have no messages, and can hang 
up, to avoid a toll charge.

1

Press 

Function/Set

, 

2

, 

1

.

2

Press 

 or 

 to select the TOLL SAVER (or RING DELAY) and press  

Function/Set

.

3

Press 

 or 

 to select ON and press 

Function/Set

.

4

Press 

Stop

 to exit.

ICM Recording Monitor

This feature lets you turn the speaker volume for voice messages ON or OFF. When 
you turn the monitor OFF, you will not hear messages as they come in.

1

Press 

Function/Set

, 

8

, 

5

.

2

Use 

 or 

 to select OFF (or ON) and press 

Function/Set

.

3

Press 

Stop

 to exit.

Recording a Conversation

You can record a telephone conversation by pressing 

Play/Record

 during the 

conversation. Your recording can be as long as the Incoming Message Maximum 
Time. You and the other party will hear a beep every 15 seconds while recording. To 
stop recording, press 

Stop

. You cannot record a conversation using Speaker Phone.

Fax Forwarding/Paging

When Paging is set to ON, your FAX/MFC dials the pager number you’ve 
programmed, and dials your Personal Identification Number (PIN) when connected, 
to activate your pager and let you know you have a fax or voice message in the 
Message Center memory.

When Fax Forwarding is set to ON, your FAX/MFC dials the fax machine phone 
number you’ve programmed, and forwards any faxes you’ve received.

When Toll Saver is ON, it overrides your Ring Delay setting. Toll Saver must be off 
for the FAX/MFC to operate using your Ring Delay setting. (See Setting Ring Delay, 
page 5-2.)

You can not use Paging and Fax Forwarding at the same time.