Heirloom ; Select .; Hemstitching (1) (Daisy Stitch) - Page 133

SEWING THE STITCHES

U

tili
ty Stit

ch
es

119

3

Heirloom 

■

Hemstitching (1) (Daisy Stitch) 

Use for sewing tablecloths, decorative hems, and 
decorative stitching on shirt fronts.

a

Insert a type 130/705H, size 100/16 Wing 
needle.

*

This specialty sewing needle is not furnished with 
your machine. Must be purchased separately.

b

Select a stitch and attach presser foot “N”.

*

Select any stitch between 3-01 and 3-25.

c

Start sewing.

Example:

Illustration of finished product

■

Hemstitching (2) (Drawn Work (1))

a

Pull out several threads from one area on a 
piece of fabric to open the area. 

*

Pull out 5 or 6 threads to leave a 3 mm 
(approx. 1/8 inch) area open.

b

Select .

c

Attach presser foot “N”. With the right side 
of the fabric facing up, sew one edge of the 
open area.

Memo

• Use a light to medium weight homespun fab-

ric with a little stiffness. 

 CAUTION

• The “Automatic Threading” button cannot be 

used. Thread the wing needle by hand, from 
front to back. Using the “Automatic 
Threading” button may result in damage to the 
machine. 

• A more attractive finish can be obtained if you 

use a “130/705H Wing” needle when sewing 
these patterns. If using a wing needle and the 
stitch width has been set manually, check that 
the needle will not touch the presser foot by 
carefully rotating the handwheel toward you 
(counterclockwise) before starting to sew. 

Memo

• For details on each stitch, refer to the 

“STITCH SETTING CHART” at the end of 
this manual.

Memo

• Loosely woven fabrics work best for this. 

Memo

• For details on each stitch, refer to the 

“STITCH SETTING CHART” at the end of 
this manual.