Cut the thread with cutter and remove the ; Using the Spool Pin; Turn the main power to ON and open the - Page 54

LOWER THREADING

40

k

Cut the thread with cutter and remove the 
bobbin.

■

Using the Spool Pin

You can use the main spool pin to wind the bobbin 
before sewing. You cannot use this spool pin to 
wind the bobbin while sewing.

a

Turn the main power to ON and open the 
top cover.

b

Align the groove in the bobbin with the 
spring on the bobbin winder shaft, and set 
the bobbin on the shaft.

a

Groove in the bobbin

b

Spring on the shaft

c

Pivot the spool pin so that it angles upward. 
Set the thread spool on the spool pin so that 
the thread unwinds from the front of the 
spool.

a

Spool pin

b

Spool cap

c

Thread spool

d

Spool felt

d

Push the spool cap onto the spool pin as far 
as possible, then return the spool pin to its 
original position.

e

While holding the thread with both hands, 
pull the thread up from under the thread 
guide plate.

a

Thread guide plate

Memo

• When removing the bobbin, do not pull on 

the bobbin winder seat. Doing so could 
loosen or remove the bobbin winder seat, 
and could result in damage to the machine.

 CAUTION

• Setting the bobbin improperly may cause the 

thread tension to loosen, breaking the needle 
and possibly resulting in injury.