Select a stitch.; Attach the vertical stitch alignment foot ; Peel off the transparent sheet of the edge - Page 153

Brother 882-W01 User Manual

2014 Dodge Charger SRT Owner Manual

Table of Contents

background image

SEWING THE STITCHES

U

tili
ty Stit

ch
es

139

3

a

Select a stitch.

*

Edge sewing using the built-in camera cannot be 

used with patterns where 

 appears in gray 

when the pattern is selected.

b

Attach the vertical stitch alignment foot 
“V”.

c

Peel off the transparent sheet of the edge 
sewing sheet.

Note

• Clean stitching cannot be sewn if this 

function is used when the edge of the fabric 
has corners as shown below.

• When edge sewing using the built-in 

camera, make sure that the room is evenly 
lit. If the brightness in the room changes 
while edge sewing, the built-in camera may 
not be able to detect the edge of the fabric.

• The built-in camera detects the contrast 

between the fabric and the background. 
Therefore, observe the following 
precautions.

– If the edge of the fabric is fraying, cut off 

any excess fabric threads.

– If the fabric has a complicated pattern, is 

sheer or is glossy, such as a vinyl 
material, the built-in camera may not be 
able to detect it correctly.

• For best results, iron the fold when folding 

the edge of the fabric for edge sewing.

• When “Width Control” on page 1/7 of the 

settings screen is set to “ON” or when “Nee-
dle Position – Stitch Placement” on page 3/7 
is set to “ON”, the built-in camera cannot be 
used with edge sewing. If either of these 

parameters are set to “ON”, 

 appears 

gray and cannot be selected.
Before using the built-in camera for edge 
sewing, set “Width Control” and “Needle 
Position – Stitch Placement” in the settings 
screen to “OFF”.

 CAUTION

• When edge sewing with the built-in camera, 

be sure to use the vertical stitch alignment foot 
“V”. In order to maintain a fixed distance from 
the edge of the fabric, the needle will slightly 
move to either side, even when sewing with a 
straight stitch. If a different presser foot is 
used, it may be hit by the needle, causing the 
needle to break or resulting in injuries.

Detailed Information for Brother 882-W01 User Manual

Lists of information found in Brother 882-W01 User Manual - Page 153

  • Clean stitching cannot be sewn if this function is used when the edge of the fabric has corners as shown below.
  • When edge sewing using the built-in camera, make sure that the room is evenly lit.
  • The built-in camera detects the contrast between the fabric and the background.
  • For best results, iron the fold when folding the edge of the fabric for edge sewing.
  • When “Width Control” on page 1/7 of the settings screen is set to “ON” or when “Nee- dle Position – Stitch Placement” on page 3/7 is set to “ON”, the built-in camera cannot be used with edge sewing.
  • When edge sewing with the built-in camera, be sure to use the vertical stitch alignment foot “V”.

Related Documents for Brother 882-W01 User Manual