Lower the presser foot, then press the ; After 5-6 stitches, press the “Start/Stop” ; button again to stop the machine. - Page 228

SEWING AN EMBROIDERY PATTERN

214

b

Lower the presser foot, then press the 
“Start/Stop” button to start embroidering. 
After 5-6 stitches, press the “Start/Stop” 
button again to stop the machine. 

c

Trim the excess thread at the end of the 
seam. If the end of the seam is under the 
presser foot, raise the presser foot, then 
trim the excess thread. 

d

Press the “Start/Stop” button to start 
embroidering.

o

When the first color is completely sewn, the machine 
will automatically trim the threads and stop. The 
presser foot will then automatically be raised.
On the embroidery color order display, the next 
color will move to the top.

e

Remove the thread for the first color from 
the machine. Thread the machine with the 
next color.

f

Repeat the same steps for embroidering the 
remaining colors.

o

When the last color is sewn, “Finished sewing” will 

appear on the display. Press 

, and the 

display will return to the original screen.

Memo

• If there is thread left over from the beginning 

of sewing, it may be sewn over as you con-
tinue embroidering the pattern, making it 
very difficult to deal with the thread after the 
pattern is finished. Trim the threads at the 
beginning of each thread change.

Memo

• The Thread Trimming Function is originally 

set to trim excess thread jumps (threads 
linking parts of the pattern, etc.). Depending 
on the type of thread and fabric that are 
used, an end of upper thread may remain on 
the surface of the fabric at the beginning of 
the stitching. After embroidering is finished, 
cut off this excess thread.
*If the setting has been turned off, trim the 
excess thread jumps using scissors after the 
pattern is finished.
See page 230 for information on the thread 
trimming function.