Embroidery Data Precautions; Types of Embroidery Data that can be Used; Types of USB Devices/Media that can be Used- Page 258

USING THE MEMORY FUNCTION

244

USING THE MEMORY FUNCTION

Embroidery Data Precautions

Observe the following precautions when using embroidery data other than that created and saved in this 
machine.

■

Types of Embroidery Data that can be Used

• Only .pes,.pha,.phb,.phc, and .dst embroidery data files can be used with this machine. Using data other 

than that saved using our data design systems or sewing machines may cause the embroidery machine to 
malfunction.

■

Types of USB Devices/Media that can be Used

Stitch data can be saved to or recalled from USB media. Use media that meets the following specifications.
• USB Flash drive (USB Flash memory)
• USB Floppy disk drive
Stitch data can be recalled only.
• USB CD-ROM, CD-R, CD-RW drives
You can also use the following types of USB media with the USB Memory Card Reader/USB card writer module.
• Secure Digital (SD) Card
• CompactFlash
• Memory Stick
• Smart  Media
• Multi Media Card (MMC)
• XD-Picture Card

 CAUTION

• When using embroidery data other than our original patterns, the thread or needle may break when 

sewing with a stitch density that is too fine or when sewing three or more overlapping stitches. In that 
case, use one of our original data design systems to edit the embroidery data.

Note

• The processing speed may vary by port selection and quantity of data stored.

• Some USB media may not be usable with this machine. Please visit our website for more details. 

• The access lamp will begin blinking after inserting USB devices/media, and it will take about 5 to 6 sec-

onds to recognize the devices/media. (Time will differ depending on the USB device/media).

Memo

• To create file folders, use a computer.

• Letters and numerals can be used in the file names. In addition, if the file name contains no more than 

eight characters, the entire file name will appear on the screen.
If the file name is more than eight characters long, only the first six characters followed by “~” and a 
number appear as the file name.