Select a buttonhole stitch, and attach ; buttonhole foot “A”.; Mark the position and length of the - Page 136

SEWING THE STITCHES

122

One-step buttonholes are sewn from the front of the presser foot to the back, as shown below.

a

Reinforcement stitching

a

Select a buttonhole stitch, and attach 
buttonhole foot “A”.

b

Mark the position and length of the 
buttonhole on the fabric.

c

Pull out the button holder plate on the 
presser foot, and insert the button that will 
be put through the buttonhole. Then tighten 
the button holder plate around the button. 

a

Button holder plate

d

Align the presser foot with the mark on the 
fabric, and lower the presser foot.

a

Mark on the fabric 

b

Marks on the presser foot

Memo

• The maximum buttonhole length is about 

28 mm (approx. 1-1/16 inches) (diameter + 
thickness of the button).

Memo

• The size of the buttonhole is determined by 

the size of the button in the button holder 
plate.

A