Using the Built-In Camera to ; Align the Embroidering Position; Affix the embroidery positioning sticker to - Page 220

CONFIRMING THE PATTERN POSITION

206

CONFIRMING THE PATTERN POSITION

The pattern is normally positioned in the center of the embroidery frame. If the pattern needs to be 

repositioned for better placement on the garment, you can check the layout before starting embroidery.

Using the Built-In Camera to 
Align the Embroidering Position

The embroidering position can easily be aligned 
using the machine’s built-in camera and the 
included embroidery positioning sticker.

a

Affix the embroidery positioning sticker to 
the location in the fabric to be 
embroidered. Place the embroidery 
positioning sticker so that the center of the 
larger circle is at the center of the 
embroidery pattern.

a

Embroidery positioning sticker

b

Center of the embroidery pattern

c

Embroidery field

Note

• When embroidery frame (small) is installed, 

the built-in camera cannot be used to align 
the embroidering position. Install embroidery 
frame (medium) or a larger embroidery 
frame.

Note

• When inserting the fabric in the embroidery 

frame, check that the embroidery pattern fits 
within the embroidery field for the frame that 
is used.

a

Embroidery field

b

Embroidery pattern

c

Embroidery positioning sticker

• Depending on the type of fabric that is used, 

a part of the embroidery positioning sticker 
may remain attached when it is peeled off. 
Before using the embroidery positioning 
sticker, check that it can be cleanly removed 
from a scrap piece of the fabric to be used.