Reprint button- Page 89

3 - 5 CONTROL PANEL

HL7050_US_UG_FM5.5

Reprint button

If you want to reprint a document that has just been printed, you can 
reprint it by pressing the Reprint button.  Also, if you have created a 
document that you wish to share with colleagues, simply spool the 
document to a non-secure area of the printer. This document can 
then be reprinted by anyone who is on the network or at the printer 
control panel.

You can use the Reprint button when the printer is in READY or 
PAUSE state.   

If you want to print PROOF, PUBLIC or SECURE data, we 
recommend that you install the optional hard disk drive (HDD) or 
CompactFlash card. 

If you do not install an HDD (see Hard disk drive (HD-EX) in 
Chapter 4.) or CompactFlash card (see CompactFlash card in 
Chapter 4.), you can reprint from random access memory (RAM). 
The reprint data in RAM will be deleted when the printer is turned off.

When you use RAM to reprint:

1

Press the Set button on the control panel to exit from the 
READY state and select RAMDISK SIZE in the SETUP menu.

2

The present RAM disk is 0MB.  Press the + button to increase 
the reprint RAM size in increments of 1MB.

We recommend that you add more RAM if you want to be able to 
print a lot of secure data.  (see RAM expansion in Chapter 4.)

■

When you increase the RAM size for Secure Printing, the 
work area of the printer is decreased and the printer 
performance will be reduced. Make sure that you reset the 
Ramdisk size to 0MB after you finish using Secure Printing.

■

When you store data in RAM, the data will be deleted when 
the printer is turned off.