11.TCP/IP Configuration; Assigning TCP/IP Information; Overview- Page 112

TCP/IP CONFIGURATION 11 - 1

11

NC9100h_FM6.0

11

TCP/IP Configuration

Assigning TCP/IP Information

Overview

The TCP/IP protocol requires that each device on the network have 
it's own unique IP address. Use the following information to learn 
about IP address configuration.

The Automatic Private IP Addressing (APIPA) protocol automatically 
assigns an IP address from the range: 169.254.1.0 to 
169.254.254.255. If the APIPA protocol is disabled, the default IP 
address of a Brother print server is 192.0.0.192. However, you can 
easily change this IP address number to match with the IP address 
details of your network. This can be done in any of the following 
ways:

■

From your machine’s control panel settings.

■

BRAdmin Professional utility (for Windows

®

 95/98/Me

/

2000/XP 

and Windows NT

®

4.0 using the IPX/SPX or TCP/IP protocols).

■

DHCP, APIPA, Reverse ARP (rarp) or BOOTP.

■

The ARP command.

■

HTTP (Web browser).

■

Other SNMP based management utility.

■

Web BRAdmin software

These configuration methods are described in the following paragraphs.

The IP address you assign to the Print/Fax server must be on 
the same logical network as your host computers. If it is not, 
you must properly configure the subnet mask and the router 
(gateway).