Windows NT®4.0 Printer Setup; Card Address; 4.0 Printer Setup- Page 85

8 - 3 DLC PRINTING

NC9100h_FM6.0

9

The selected print server address will then appear in the smaller 
box under Card Address.

10

Type in any desired name for the port (the name must not be the 
name of an existing port or DOS device, such as LPT1) and click 
OK then on the Printer Ports screen, click Next.

11

Select the correct driver click Next.

12

Give a name to the printer and specify if you wish to be able to 
print from DOS application. Then click Next.

13

Specify the share name (if you are going to share the printer).

14

Enter the Location and Comment information and click Next 
until you see the Completing the Add Printer Wizard screen.

15

Click Finish.

Windows NT

®

4.0 Printer Setup

Log into Windows NT

®

4.0 with administrative privileges. From the 

Start menu, select Settings and then Printers.

1

Select Add Printer (If you have already installed a Brother printer 
driver, double click the printer driver that you wish to configure and 
then select Printers/Properties, select the Ports tab and 
continue from Step 4 (ignoring steps 9-11 about installing the 
correct driver)).

2

Select My Computer and then click Next.

3

Select Add a Port.

4

Select Hewlett-Packard Network Port and then click New Port.