Windows NT®4.0 / Windows® 2000/XP; Other Sources of Information; 4.0 / Windows- Page 46

NETBIOS PEER TO PEER PRINTING 4 - 8

NC9100h_FM6.0

Windows NT

®

4.0 / Windows

®

 2000/XP

  2

Click on the Port/s tab and push the Add Port button. In the 
Add Port dialog, highlight Brother NetBIOS port. Click New 
Port and enter the port name. The default port name is BNT1. If 
you have already used this name, you will get an error message 
if you try to use it again, in which case use BNT2, etc... Once 
you have specified the port name, click the OK button. You will 
then see the Port Properties Dialog. Enter the Print/Fax server 
and port name of the printer that you wish to print to and click 
OK. You should now see the port that you have just created in 
the Print to the following port setting of the printer driver.

Other Sources of Information

1

Visit http://solutions.brother.com/ for more information on 
network printing. 

2

To learn how to configure the IP address on your machine, see 
Chapter 11 of this User’s Guide.