Basic Sending Operations; Contrast; Resolution- Page 49

S E T U P   S E N D      

6 - 3

5

Press 

1

 to select additional settings. The display returns to the 

SETUP SEND menu—OR—Press 

2

 if you are finished choosing settings 

and go to Step 6.

6

Enter fax number and press 

Start

.

Basic Sending Operations

Contrast

If your original is very light or very dark, you might want to set the contrast 
accordingly. Use S.LIGHT to send a very light original. Use S.DARK to send a very 
dark original.

1

Place the original face down in the ADF.

2

Press 

Function/Set

, 

3

,

 3

.

3

Press 

 or 

 to select AUTO, S.LIGHT or S.DARK and press 

Function/Set

.

4

Press 

2

 if you are finished choosing settings, and go to Step 5—OR—Press 

1

 if you 

want to select additional settings. The display returns to the Setup Send menu.

5

Enter a fax number and press 

Start

 to send a fax—OR—Press 

Copy/Help

 to make 

a copy.

Resolution

When you have an original in the ADF, you can use the

 Resolution

 key. Press 

Resolution

 continuously until you see your selection on the screen.

Standard—suitable for most typed originals.

Fine—good for small print; transmits a little slower than standard resolution. 

Super Fine—good for small print or artwork; transmits slower than fine resolution.

Photo—use when original has varying shades of gray; slowest transmission time.

If you get a MEMORY FULL message while scanning the first page of a fax, press 

Stop

 to cancel the scan. If you get a MEMORY FULL message while scanning in a 

subsequent page, you’ll have the option to press 

Start

 to transmit the pages scanned 

so far, or to press 

Stop

 to cancel the operation. In this case, send the fax by the 

Manual Transmission.

Depending on your typical faxes, MEMORY FULL errors can occur frequently. If 
this happens, change the Memory Transmission setting back to OFF.