Speed Dialing; Dialing Access Codes and Credit Card Numbers; Speaker Phone- Page 57

A U T O   D I A L   N U M B E R S   A N D   D I A L I N G   O P T I O N S      

7 - 5

Speed Dialing

1

Pick up the handset—OR—Press 

Speaker Phone

. (See Storing Speed Dial 

Numbers, page 7-2.)

2

When you hear a dial tone, press 

Search/Speed Dial

, press 

#

, then press the two-

digit Speed Dial number.

3

To hang up a voice call, replace the handset—OR—Press 

Speaker Phone

.

Dialing Access Codes and Credit Card Numbers

Sometimes you may want to choose from among several long distance carriers when 
you make a call. Rates may vary depending upon the time and destination. To take 
advantage of low rates, you can store the access codes or long-distance carriers as One 
Touch and Speed Dial numbers. You can store these long dialing sequences by 
dividing them and setting them up separately in any combination. You can even 
include manual dialing using the dial pad. The combined number will be dialed in the 
order you entered it, as soon as you press 

Start

. Make sure you selected CHAIN as 

the type of the number when you store it into the One Touch or Speed Dial. (See 
Storing One Touch Dial Numbers and Storing Speed Dial Numbers, page 7-1 to 7-2.)

For example: 

You store “555”on One Touch key 

03

 and “7000”on One Touch key 

02

. If you press 

One Touch 

03

, 

02

 and 

Start

 you will dial “555-7000”. To temporarily change a 

number, you can substitute part of the number with manual dialing using the dial pad. 
For example, to change the number to 555-7001 you can press One Touch 

03

 and 

press 

7

, 

0

, 

0

, 

1

 using the dial pad. 

If you are sending a fax, press 

Start

 after entering the Speed Dial number. If you 

picked up the handset, press 

Start

 when the receiving fax machine answers with fax 

tones.

The CallManage access code can save you money on long distance calls (for details, 
see CallManage, page 8-5). (For USA Only)

Pause after dialing Speed Dial numbers for the name to be displayed before you enter 
the next portion of the dialing sequence.