Press ; Select a stitch.; Remove the presser foot holder (see page - Page 122

Brother 882-W01 User Manual

2014 Dodge Charger SRT Owner Manual

Table of Contents

background image

SEWING THE STITCHES

108

b

Select a stitch.

c

Remove the presser foot holder (see page 
55).

d

Attach free motion open toe quilting foot 
“O” by positioning the pin of the quilting 
foot above the needle clamp screw and 
aligning the lower-left of the quilting foot 
and the presser bar.

a

Pin

b

Needle clamp screw

c

Presser bar

e

Hold the quilting foot in place with your 
right hand, and tighten the presser foot 
holder screw using the screwdriver with 
your left hand.

a

Presser foot holder screw

f

Use both hands to stretch the fabric taut, 
and then move the fabric at a consistent 
pace in order to sew uniform stitches 
roughly 2.0-2.5 mm (approx. 1/16 - 3/32 
inch) in length.

a

Stitch

g

Press 

 to cancel the free motion sewing 

mode.

Rotate the handwheel toward you 
(counterclockwise) to raise the feed dogs.

Echo Quilting Using the Free Motion 

Echo Quilting Foot “E”

Sewing quilting lines at equal distances around a 
motif is called echo quilting. The quilting lines, 
which appear as ripples echoing away from the 
motif, are the distinguishing characteristic of this 
quilting style. Use the free motion echo quilting foot 
“E” for echo quilting. Using the measurement on the 
presser foot as a guide, sew around the motif at a 
fixed interval. We recommend attaching the foot 
controller and sewing at a consistent speed.

Free motion echo quilting foot “E” measurement

 

a

6.4 mm (approx. 1/4 inch)

b

9.5 mm (approx. 3/8 inch)

Memo

• When stitch Q-01 or 1-31 is selected, free 

motion quilting foot “C” is indicated in the 
upper-left corner of the screen. When the 
other stitches are selected, free motion open 
toe quilting foot “O” is indicated in the 
screen.

Note

• Make sure that the quilting foot is not 

slanted.

 CAUTION

• Be sure to securely tighten the screws with the 

included screwdriver. Otherwise, the needle 
may touch the quilting foot, causing it to bend 
or break.

Memo

• Do not be discouraged with your initial 

results. The technique requires practice.

Detailed Information for Brother 882-W01 User Manual

Lists of information found in Brother 882-W01 User Manual - Page 122

  • 2.0-2.
  • 6.4 mm (approx.
  • 9.5 mm (approx.
  • When stitch Q-01 or 1-31 is selected, free motion quilting foot “C” is indicated in the upper-left corner of the screen.
  • Make sure that the quilting foot is not slanted.
  • Be sure to securely tighten the screws with the included screwdriver.
  • Do not be discouraged with your initial results.

Related Documents for Brother 882-W01 User Manual