Press ; Fuse or stick a piece of stabilizer to the ; back of the felt or denim fabric to be used - Page 312

VARIOUS EMBROIDERING FUNCTIONS

298

f

Press 

 to select the appliqué setting.

o

The steps for creating the appliqué piece are added 
to the sewing order.

g

Fuse or stick a piece of stabilizer to the 
back of the felt or denim fabric to be used 
as the appliqué piece.

h

Hoop the appliqué fabric in the embroidery 
frame, attach the embroidery frame to the 
machine, and then start embroidering.

Note

• When 

 is pressed, the pattern is moved 

to the center. After selecting the appliqué 
setting, move the pattern to the desired 
position.

Memo

• To cancel the setting, press 

.

• If no pattern is selected, the key appears 

gray and cannot be selected.

Memo

• Three steps are added to the sewing order: 

appliqué cutting line, position of pattern 
placement on the garment, and appliqué 
stitching.

a

Cutting line for appliqué

b

Position of pattern placement on garment

c

Appliqué stitching

Note

• An appliqué piece cannot be created if the 

pattern is too large or too complicated or a 
combined pattern is separated. Even if the 
selected pattern fits within the embroidering 
area, the entire appliqué pattern may 
exceed the embroidering area when the out-
line is added. If an error message appears, 
select a different pattern or edit it.

Note

• For best results, be sure to use stabilizer 

material for embroidering.

a

b
c