Press .; Wind the thread clockwise around the ; bobbin 5-6 times.- Page 53

LOWER THREADING

Ge
tting

 Re
ad

y

39

1

g

Wind the thread clockwise around the 
bobbin 5-6 times.

h

Pass the end of the thread through the guide 
slit in the bobbin winder seat, and pull the 
thread to the right to cut the thread with 
the cutter.

a

Guide slit (with built-in cutter)

b

Bobbin winder seat

i

Set the bobbin winding switch to the left, 
until it clicks into place.

a

Bobbin winding switch

o

The bobbin winding window appears.

j

Press .

o

Bobbin winding starts automatically. The bobbin 
stops rotating when bobbin winding is completed. 
The bobbin winding switch will automatically return 
to its original position.

 CAUTION

• Be sure to follow the process described. If the 

thread is not cut with the cutter, and the 
bobbin is wound, when the thread runs low it 
may tangle around the bobbin and cause the 
needle to break.

Memo

• Sliding the bobbin winding switch to the left 

switches the machine into bobbin winding 
mode.

Note

•

 changes to 

 while the bobbin 

is winding.

• Stay near the machine while winding the 

bobbin to make sure the bobbin thread is 
being wound correctly. If the bobbin thread 

is wound incorrectly, press 

 immedi-

ately to stop the bobbin winding.

• The sound of winding the bobbin with stiff 

thread, such as nylon thread for quilting, 
may be different from the one produced 
when winding normal thread; however, this 
is not a sign of a malfunction.

Memo

• You can change the winding speed by 

pressing 

 (to decrease) or 

 (to 

increase) in the bobbin winding window.

• Press 

 to minimize the bobbin winding 

window. Then, you can perform other opera-
tions, such as selecting a stitch or adjusting 
the thread tension, while the bobbin is being 
wound.

• Press 

 (in top right of the LCD screen) 

to display the bobbin winding window again.