Pass the thread under the guide on the ; Securely pass the thread through the groove ; in the thread cutter, and then lightly pull the - Page 62

EMBROIDERING TUTORIAL 

—————————————————————————————————————————————————————————————————

60

3

Pass the thread under the guide on the 
presser foot.

1

Guide on presser foot

2

Notch in guide on presser foot

• Make sure that the thread securely passes 

through the notch in the guide on the 
presser foot.

4

Securely pass the thread through the groove 
in the thread cutter, and then lightly pull the 
thread to cut it.

1

Groove in thread cutter

Note

●

If the thread is not correctly passed 
through the groove in the thread cutter, 
the message “Wiper error” appears and 
the needle cannot be threaded. Be sure to 
securely pass the thread through the 
groove.

●

If enough thread is not pulled out, the 
thread cannot be pulled through the 
thread cutter.

5

Press the automatic needle-threading 
button.

• The threader moves back away from the 

needle. The thread is pulled through the 
needle eye.

• The wiper comes out and catches the 

thread between the needle and the 
threader.

• The threader goes back to the original 

home position.

This completes the upper threading for 
needle bar 1.

Thread the remaining needle bars in the same 
way. Note : If the needle bar to be threaded is 
not moved to the embroidering position, the 
needle cannot be threaded with the 
automatic needle-threading mechanism. For 
the remaining needle bars, perform the 
following operation to move the needle bar 
to the embroidering position before trying to 
thread the needle.