9. Sewing; 9-1. Sewing with the folder in automatic mode- Page 32

25

BAS-761

9. Sewing

9. Sewing

9-1. Sewing with the folder in automatic mode

2.

Press the FOLDER RESET button 

!9

.

The machine head will move to the home position and then
stop in the standby condition.

3.

Set the folder mode to automatic mode.

NOTE:

Refer to page 18 for details on how to set the folder mode.

4.

Press the STACKER button 

r

 so that the STACKER indicator is illuminated.

5.

Place the workpiece 

w

 under the gauge assembly 

q

. (*1)

6.

Depress the foot switch 

@3

. The vacuum system will start operating to hold the workpiece 

w

 in place.

NOTE:

If the foot switch 

@3

 is depressed once more, the vacuum system will turn off while the foot switch 

@3

 is being

depressed, allowing the workpiece to be positioned more easily.

7.

Place the pocket material 

e

 on top of the gauge assembly 

q

.

8.

Press the RESTART buttones 

@4

 simultaneously.

The pocket material 

e

 will be folded by the folder and the workpiece 

w

 and the pocket material 

e

 will then be

moved to the machine head and sewing will start. (*2)

9.

Once sewing is finished, the stacker will operate and the workpiece 

w

 will be stacked. The machine head and the

work clamp will then return to the standby positions.

*1

If DIP switch D-1 has been set to ON, the gauge assembly 

q

 will retract. The gauge assembly 

q

 moves

forward at the same time the vacuum system starts operating when the foot switch 

@3

 is depressed.

*2

If DIP switch A-1 has been set to ON, operation stops momentarily after folding has been completed so that
the folding can be checked. When the RESTART buttones 

@4

 are pressed again simultaneously, operation

continues as before.

Press FOLDER RESET SW

to start searching for home
position.

r

@4

e

w

q

@3

1.

Turn on the air pressure and then turn on the power switch.
The following screen will be displayed on the panel.