12. Table of error code- Page 45

38

BAS-761

Error code

E – 500

E – 501

E – 502

E – 503

E – 504

E – 505

E – 510

E – 511

E – 512

E – 513

E – 520

E – 530

E – 535

E – 536

E – 540

E – 550

E – 560

E – 570

E – 580

E – 600

E – 700

E – 701

E – 710

E – 711

E – 720

E – 730

E – 740

E – 750

E – 780

E – 781

Reset

No

No

No

No

No

No

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

No

No

No

No

No

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Contents

Abnormal rise in 24 V power supply voltage (exceeds +20% of rating)

Abnormal drop in 24 V power supply voltage (exceeds -20% of rating)

Abnormal rise in 36 V power supply voltage (exceeds +20% of rating)

Abnormal drop in 36 V power supply voltage (exceeds -20% of rating)

Abnormal rise in primary voltage (exceeds +20% of rating)

Abnormal drop in primary voltage (exceeds -20% of rating)

Needle bar is not at its highest position at the start of positioning.

Needle bar is not at its highest position at the start of sewing.

Needle bar is not at its highest position during test feeding.

Needle bar is not at its highest position during programming.

Upper thread breakage error

Model and sewing program number do not match.

Retractable are for double (0 to 31) but data does not contain a double switching
command.

Model numbers are for single (32 to 63) but data does not contain a single
switching command.

Machine head synchronization sensor error or machine head motor error

Needle up stop error

Presser foot cylinder malfunction or sensor malfunction

Double sensor error

Needle racking cylinder malfunction or sensor malfunction

Machine started with no sewing data

Error occurred when reading from floppy disk

Error occurred when writing to floppy disk

No sewing data for number specified

Data writing carried out with no sewing data

No disk in floppy disk drive

Floppy disk is write-protected

Insufficient free space on floppy disk

Floppy disk cannot be formatted.

Sewing data exceeds sewing area

No end code in sewing data

12. Table of error code

12. Table of error code

¡

If an error occurs which cannot be reset, turn off the power momentarily and eliminate the cause of the problem.

¡

If an error occurs which can be reset, eliminate the cause of the problem and then press the RESET button.