9-3. Sewing with the folder in label attachment mode; 9. Sewing- Page 34

27

BAS-761

9-3. Sewing with the folder in label attachment mode

¡

Two types of label attachment mode can be used: when DIP switch D-2 is set to OFF, alternate label attachment
is carried out, and when DIP switch D-2 is set to ON, continuous label attachment is carried out.

¡

With alternate label attachment, the folder switches alternately between label attachment mode and automatic
mode once for each sewing operation. During label attachment mode, the LABEL indicator 

e

 illuminates. If you

would like to switch over the modes, press the LABEL button 

e

.

¡

With continuous label attachment, label attachment mode is active all the time. (The LABEL indicator 

e

 will re-

main illuminated.)

1.

Set the folder mode to label attachment mode.

NOTE:

Refer to page 18 for details on how to set the folder mode.

2.

Press the STACKER button 

r

 so that the STACKER indicator is illuminated.

3.

Place the workpiece 

t

 under the gauge assembly 

q

. (*1)

4.

Depress the foot switch 

@3

. The vacuum system will start operating to hold the workpiece 

t

 in place.

5.

Place the pocket material 

y

 on top of the gauge assembly 

q

.

6.

Depress the foot switch 

@3

, and hold it in that condition. The intermediate work clamp 

u

 will be set down on top of

the gauge assembly 

q

 and label setting will be possible.

Place the label 

i

 into the clamp 

o

 of the label attacher.

After setting the label 

i

 in place, release the foot switch 

@3

. The clamp 

o

 of the label attacher will clamp the label

i

 and then rotate to the folding position.

If you would like to reclamp the label 

i

, depress the foot switch 

@3

 once more and keep it depressed. The label can

then be reset.

7.

Press the RESTART buttones 

@4

 simultaneously.

The pocket material 

y

 will be folded by the folder and the workpiece 

t

 and the pocket material 

y

 will then be

moved to the machine head and sewing will start. (*2)

8.

Once sewing is finished, the stacker will operate and the workpiece 

w

 will be stacked. The machine head and the

work clamp will then return to the standby positions.
* If the LABEL indicator e is switched off, it means that automatic mode is active.

*1

If DIP switch D-1 has been set to ON, the gauge assembly 

q

 will retract. The gauge assembly 

q

 moves

forward at the same time the vacuum system starts operating when the foot switch 

@3

 is depressed.

*2

If DIP switch A-1 has been set to ON, operation stops momentarily after folding has been completed so that
the folding can be checked. When the RESTART buttones 

@4

 are pressed again simultaneously, operation

continues as before.

r

o

@3

@4

9. Sewing

i

t

u

q

y

e