9-4. Sewing with the folder in step mode; 9. Sewing- Page 35

28

BAS-761

9. Sewing

9-4. Sewing with the folder in step mode

¡

In step mode, the folder operates in a step-by-step manner, so that checking can be carried out during folding.

¡

If he LABEL indicator 

e

 is switched off, automatic mode is followed during step mode operation. If the LABEL

indicator 

e

 is illuminated, label attachment mode is followed.

NOTE:

Selecting the mode to be followed is carried out by using the LABEL button 

e

.

1.

Turn on the air pressure and then turn on the power
switch.
The screen shown at left will be displayed on the
panel.

2.

Press the FOLDER RESET button 

!9

. The machine

head will move to the home position and then stop
in the standby condition.

3.

Set the folder to step mode.

NOTE:

Refer to page 18 for details on how to set the folder
mode.

4.

Press the STACKER button 

r

 so that the STACKER

indicator is illuminated.

5.

Place the workpiece 

q

 under the gauge assembly 

q

.

(*1)

6.

Depress the foot switch 

@3

. The vacuum system will

start operating to hold the workpiece 

q

 in place.

7.

Place the pocket material 

e

 on top of the gauge as-

sembly 

w

.

8.

The folder operates one step at a time each time the STEP button 

t

 is pressed.

9.

If you continue to press the STEP button 

t

 after folding has been completed, the work clamp assembly will move

to the folder side and operation will continue from transporting to sewing.

NOTE:

At any point up until the folder is released, the folder can be moved in reverse by depressing and holding the foot
switch 

@3

 while pressing the STEP button 

t

.

*1

If DIP switch D-1 has been set to ON, the gauge assembly 

w

 will retract. The gauge assembly 

w

 moves

forward at the same time the vacuum system starts operating when the foot switch 

@3

 is depressed.

Press FOLDER RESET SW

to start searching for home
position.

q

e

w

@3