LAN Server, OS/2 Warp Server Configuration; Server Configuration; Configuration of an OS/2 Server- Page 37

2 - 11 TCP/IP PRINTING

YL4US_FAX2800MFC4800-FM5.5

LAN Server, OS/2 Warp Server Configuration

Brother print servers will work with IBM LAN Server, OS/2 Warp 
Server networks that have IBM TCP/IP V2.0 or later installed on the 
file server (TCP/IP is supplied as standard with LAN Server V4.0 and 
later as well as Warp Server). Use the following procedure to 
configure the print server on an LAN Server or OS/2 Warp Server file 
server, or on an OS/2 Warp Connect workstation:

Server Configuration

Make sure that TCP/IP software is installed on your OS/2 file server. 
If you have not already done so, open the TCP/IP folder on the 
desktop, and double click on the TCP/IP Configuration icon to add 
the IP address to the OS/2 file server (consult your system manager 
for this address).

Refer to chapter 12 for information on how to assign an IP address 
to the printer.

Configuration of an OS/2 Server

1

From the OS/2 desktop open the Templates folder. Use the 
right mouse button to drag the Printer icon (not the Network 
Printer icon) onto the desktop.

2

The Create a Printer window should be open (if it is not, double 
click on the printer icon).

3

Type in any name for the printer.

4

Select the default printer driver. If the desired printer driver is not 
listed, click on the Install new Printer Driver button and add the 
driver.

5

Choose the output port. IBM TCP/IP automatically creates 8 
named pipes called  

\PIPE\LPD0

 through to 

\PIPE\LPD7

.