Bar code, expanded character, line block drawing and box ; drawing offset in X-axis; Bar code & expanded character offset in Y-axis- Page 246

 A - 47

HL7050_US_UG_FM5.5

Bar code, expanded character, line block drawing and box 
drawing offset in X-axis

n = 'xnnn' or 'Xnnn'

This parameter shows the offset from the left margin in the 'u'- or 'U'-
specified unit. 

Bar code & expanded character offset in Y-axis

n = 'ynnn' or 'Ynnn'

This parameter shows the downward offset from the current print 
position in the 'u'- or 'U'-specified unit. 

Bar code, expanded character, line block drawing and box 
drawing height

n = 'hnnn', 'Hnnn', 'dnnn', or 'Dnnn'

(1) EAN13, EAN8, UPC-A, ISBN (EAN13, EAN8, UPC-A), 

ISBN (UPC-E): 22 mm

(2) UPC-E:

18 mm

(3) Others:

12 mm

Expanded characters 

→ 

2.2 mm (preset) 

Line block drawing and box drawing 

→

1 dot

This parameter shows the height of bar codes or expanded 
characters as shown above.  It can start with 'h', 'H', 'd', or 'D'.  The 
height of bar codes is shown in the 'u'- or 'U'-specified unit.  The 
factory setting of the bar code height (12 mm, 18 mm or 22 mm) is 
determined by the bar code mode selected by 't' or 'T'. 

Expanded character width, line block drawing and box drawing

n = 'wnnn' or 'Wnnn'

Expanded character

→ 

1.2 mm

Line block drawing and box drawing

→ 

1 dot

This parameter shows the width of expanded characters as shown 
above.