ABOUT THIS PRINTER 1 - 11- Page 30

ABOUT THIS PRINTER 1 - 11

HL7050_US_UG_FM5.5

■

Do not put the printer in direct sunlight. If you have to put it near a 
window, use a blind or a heavy curtain to protect the printer from 
direct sunlight. 

■

Do not install the printer near other electronic equipment.

■

Do not drop, bang or shake the printer.  Do not put the printer on 
a surface that vibrates.  Do not expose the printer to open flames 
or salty or corrosive gases. 

■

Keep the printer clean. Do not put the printer in a dusty place. 

■

Do not put the printer near an air conditioner or humidifier.

■

Make sure that the power outlet is near the machine and is easy 
to get to so that, if there is an emergency, it can be easily 
unplugged.

■

Only connect the machine to the power source described under 
Power Supply in this User's Guide.

■

Put the printer on a flat, horizontal surface.

■

Do not damage, break or make any changes to the power cord.  
Do not put heavy objects on it, pull it hard or bend it more than 
necessary.  These actions could damage the cord.  A frayed or 
damaged cord might cause an electrical fire hazard.

■

Ventilate the room where you are using the printer.

■

Do not put the printer where the ventilation hole of the printer is 
blocked. Keep a gap of approximately 100 mm (4 in.) between the 
ventilation hole and the wall.

■

Be careful not to trip on the legs of the base unit.