How to load paper; To load paper or other media in the paper tray; 1 - 11- Page 30

Chapter 1

1 - 11

How to load paper

To load paper or other media in the 
paper tray

1

Pull the paper tray completely out of the 
MFC.

2

While pressing the paper guide release 
lever, slide the adjusters to fit the paper 
size.
Check that the guides are firmly in the 
slots.

Note

For Legal size paper, press in the inside 
latches and pull out the back of the paper 
tray.

3

Fan the stack of paper well to avoid 
paper jams and mis-feeds.

4

Put paper in the paper tray.

5

Put the paper tray firmly back in the 
MFC and unfold the output paper tray 
support flap before you use the MFC.

Note

When you put paper in the paper tray, please 
remember the following:

■

Check that the paper is flat in the tray and 
below the maximum paper mark, and that 
the paper guides are touching the sides of 
the paper stack.

■

The side to be printed on must be face 
down.

Maximum paper mark

Output Paper 
Tray Support 
Flap