Using BRAdmin and the IPX/SPX Protocol to Set the IP Address; Search Active Devices; Using BRAdmin and the IPX/SPX Protocol to Set - Page 105

10 - 3 TCP/IP CONFIGURATION

Using BRAdmin and the IPX/SPX Protocol to Set 
the IP Address

If your PC is using the Novell NetWare Client software and is using 
the IPX/SPX protocol, do the following:

1

Select IPX/SPX filter in the left frame of the main window.

2

Check the print server name (the default node name is 

BRN_xxxxxx

, where 

xxxxxx

 is the last six digits of the 

Ethernet address (MAC address)).

If you cannot find your server name, select the Device menu and 
choose Search Active Devices (you can also press the F4 key) and 
try again.

3

Select the print server that you wish to configure and double 
click it. You will be asked for a password. The default password 
is 

access

.

4

Select the TCP/IP tab and set the IP address, Subnet mask 
and Gateway as needed. 

5

In the IP Config box, click the Static radio button. 

6

Click OK.

Restart the print server by using BRAdmin, Web Browser or 
TELNET. If you are not sure how to restart the print server, you may 
simply turn the printer’s power switch off, and then switch it on.

You can find the node name and MAC address by printing 
out the printer settings page. Refer to the Quick Setup Guide 
for information on how to print the settings page on your print 
server.