NetBIOS Port Monitor for Windows® 95/98/Me/ 2000/XP and Windows NT®4.0; Installing the Brother NetBIOS Port Monitor; Software Installation- Page 45

4 - 4 NETBIOS PEER TO PEER PRINTING

NetBIOS Port Monitor for Windows

®

 95/98/Me/

2000/XP and Windows NT

®

4.0

This software requires the TCP/IP transport protocols to be installed 
on your Windows

®

 95/98/Me/2000/XP and Windows NT

®

4.0 

computer. To install those protocols refer to your Windows

®

documentation. 
If you are using the TCP/IP protocol, the proper IP address should 
be defined on both the Brother print server and your client PC.

Installing the Brother NetBIOS Port Monitor

1

Start the CD-ROM installation menu program according to the 
Quick Setup guide. 

2

Select the proper model and then the Software Installation 
menu. Then select the Network Print Software menu to start 
the Brother Network Print Software installation program.

3

Click the Next button in response to the Welcome message.

4

Select Brother Peer-to-Peer Print (NetBIOS) installation

5

Select the desired directory to install the Brother Network 
Direct Print files and click Next.

6

Enter the port name that you wish to use. The port name must 
start with "BNT". For example BNT1. Whichever name you 
choose, it must be unique. Then click OK. The name must be 
unique on your PC, however other computers can use the same 
port name as the name you specify on your PC.

If you already installed the driver from the printers CD-ROM 
Installer and you selected "Brother Peer-to-Peer Network 
Printer" during the installation then you do not need to install 
the Brother Network Print Software again.