Configuring the Brother Print Server (Remote Printer Mode) Using PCONSOLE and BRCONFIG; Print Queue ; Available Options- Page 80

NOVELL NETWARE PRINTING 6 - 18

■

Service is the name of the service assigned by NetWare print 
server name (where the default services are 

BRN_xxxxxx_P1

 for the Brother printer, where 

xxxxxx

 is 

the last six digits of the Ethernet address (MAC address)).

■

You can also enter the TREE and CONTEXT name using 
your web browser, by connecting to the Brother print server 
using the TCP/IP protocol and selecting the NetWare 
protocol configuration.

22

Use the BRCONFIG command or TELNET command: 

SET 

NETWARE RESCAN 

to force the print server to rescan for file 

servers, or power cycle the printer.

Configuring the Brother Print Server 
(Remote Printer Mode) Using PCONSOLE and 
BRCONFIG

1

Make sure that the PSERVER NLM (NetWare Loadable 
Module) is loaded on your file server.

2

Log into the file server from your PC workstation as 

ADMIN

 if you 

are using NetWare 4.1x (if you want NDS support, do not login 
under bindery mode). If you are using NetWare 2.xx or 3.xx, 
login as 

SUPERVISOR

.

3

Run the PCONSOLE utility from your PC workstation.

4

If you are creating a new print queue, select Print Queue 
Information (NetWare 3.xx) or Print Queues (NetWare 4.1x) 
from the Available Options menu. 

The same service assigned by NetWare print server cannot 
be used for both queue server mode and remote printer 
mode. If you want to enable remote printer capabilities on a 
service other than the default NetWare service, you must 
define new services that are enabled for NetWare and for the 
desired port. Refer to Appendix in this manual for information 
on how to do this.