Configuring the Brother Print Server (Queue Server Mode in NDS Mode) Using PCONSOLE and BRCONFIG; Queue Servers; Available Options- Page 77

6 - 15 NOVELL NETWARE PRINTING

11

Press INSERT to create a new queue on the file server, type the 
new queue name and press ENTER. The name does not have 
to be related to the name of the print server resources, but 
should be short and convenient for users to remember.

12

Make sure that the new queue name is highlighted, and then 
press ENTER to configure the queue. 

13

Select Queue Servers (in NetWare 4.1x, this item is called 
print servers) and press ENTER to specify which network print 
servers can print jobs from this print queue. The list will be 
empty, since none have been selected yet if this is a new queue. 

14

Press INSERT to get a list of the queue server candidates and 
select the print server service name from step 9, Press ENTER.

15

Press ESCAPE several times until you return to the Available 
Options menu.

Force the print server to rescan file servers for print jobs. You may 
either turn the printer off and on again or you may use the 
BRCONFIG or TELNET command 

SET NETWARE RESCAN

 to make 

the print server rescan for file servers.

Configuring the Brother Print Server (Queue 
Server Mode in NDS Mode) Using PCONSOLE and 
BRCONFIG

1

Make sure that you are logged in as 

ADMIN

 in NDS mode on the 

NetWare 4.1x file server.

2

Run the PCONSOLE utility from PC workstation.

3

Select print servers from the Available Options menu.

4

Press INSERT and enter the print server name.