Brother Internet Print: Using TELNET to Configure the Print Server; Brother Internet Print: Using TELNET to Configure ; the Print Server - Page 56

CONFIGURING INTERNET PRINTING FOR WINDOWS

®

 5 - 6

Brother Internet Print: Using TELNET to Configure 
the Print Server 

1

When you get the 

Local>

 prompt after connecting to the 

console, enter the command:

SET  POP3  ADDRESS  address

where 

ipaddress

 is the address of your POP3 server (consult 

with your network administrator if you do not know this address).

2

Enter the command:

SET  POP3  NAME  mailboxname 
SET  POP3  PASSWORD  emailpassword

where 

mailboxname

 is the name of the remote print server 

mailbox and 

emailpassword

 is the password associated with 

this mailbox. Usually the mailbox name is the same as the first 
part of the E-mail address that you defined previously (for 
example, usually if the E-mail address is emailprinter@xyz.com, 
then the mailbox name is emailprinter).

3

The print server is set by default to poll the POP3 server every 30 
seconds. If you wish to change this value, enter the command:

SET  POP3  POLLING  rate

where 

rate

 is the polling rate in seconds.

Type 

EXIT

 to exit the console and save the changes. You have 

now completed configuring the print server.

Skip this section if you used BRAdmin or a Web Browser to 
configure the remote print server.

As an alternative to BRAdmin, you can use the print server 
remote console to configure the print server. The console can 
be accessed via TELNET. When you access the print server 
using these utilities, you will be asked for a password. The 
default password is 

access

.