HTTP (Recommended); WebJetAdmin; TELNET- Page 129

A - 2 APPENDIX

HTTP (Recommended)

Use your favorite web browser to connect to the Brother print server. 
This will allow you to configure printer and/or print server parameters.

WebJetAdmin

Brother's print server range is HP WebJetAdmin compatible.

TELNET

To connect to the print server using TELNET on UNIX, Windows 
NT

®

4.0, or most other TCP/IP systems, type: TELNET 

ipaddress

at the command prompt of the system prompt, where ipaddress is 
the IP address of the print server. When you are connected, click 
RETURN or ENTER to get the "#" prompt, enter the password 

access

 (the password will not appear on the screen), and type 

anything in response to the 

Enter Username

> prompt. When you 

see the 

Local

> prompt, you are ready to enter commands.

Enter HELP at the command prompt for a list of supported 
commands. 

BRCONFIG

The Brother BRCONFIG utility runs from the DOS system prompt 
and is installed with BRAdmin. To connect the print server using the 
Brother BRCONFIG NetWare utility, choose the BRCONFIG utility 
from the Brother BRAdmin utilities menu. If you have only one print 
server, you will be immediately connected to that server. If you have 
more than one print server, you will be given a list of available print 
servers. Type the number of the print server to which you wish to 
connect. When you are connected, enter the password 

access

 (the 

password will not appear on the screen) at the "#" prompt, and type 
anything in response to the 

Enter Username

> prompt. When you 

get the 

Local

> prompt, you are ready to enter commands. To use 

BRCONFIG, a Novell Server (running the IPX protocol) is necessary 
and an active connection must be made to the server.

Enter HELP at the command prompt for a list of supported 
commands.