Changing the IP Address Settings with the TELNET Console; Changing the IP Address Settings with the - Page 113

10 - 11 TCP/IP CONFIGURATION

If you do not have any subnets, use one of the following default 
subnet masks:

255.255.255.0 

for class C networks

255.255.0.0 

for class B networks

255.0.0.0 

for class A networks

The leftmost group of digits in your IP address can identify the type 
of network you have. The value of this group ranges from 192 
through 255 for Class C networks (e.g., 192.189.207.3), 128 through 
191 for Class B networks (e.g.,128.10.1.30), and 1 through 127 for 
Class A networks (e.g., 13.27.7.1).

If you have a gateway (router), enter its address with the command 

SET IP ROUTER routeraddress

, where 

routeraddress

 is the 

desired IP address of the gateway you wish to assign to the print 
server. For example:

Local> SET IP ROUTER 192.189.207.1

Type 

SET IP METHOD STATIC

 to set the method of IP access 

configuration to static.

To verify that you have entered the IP information correctly, type 

SHOW IP

.

Type 

EXIT

 or CTR-D (i.e., hold down the control key and type "D") 

to end the remote console session.

Changing the IP Address Settings with the 
TELNET Console

You can also use the TELNET command to change the IP address.

Using TELNET is effective way, when you change the IP address. But 
a valid IP address must already be programmed into the print server.

If you are using the TELNET, you will be expected to enter the 
password of the print server. Press RETURN and enter the default 
password of 

access

 in response to the "#" prompt (it will not echo).

You will be prompted for a user name. Enter anything in response to 
this prompt.