Using BRAdmin and the TCP/IP Protocol to Set the IP Address; Search Active Devices; Using BRAdmin and the TCP/IP Protocol to Set - Page 106

TCP/IP CONFIGURATION 10 - 4

Using BRAdmin and the TCP/IP Protocol to Set 
the IP Address

If your PC is using the TCP/IP protocol, do the following:

1

Select TCP/IP filter in the left frame of the main window.

2

Select the Device menu and choose the Search Active 
Devices.

3

Select the Device menu and choose Setup Unconfigured 
Device.

4

Select the MAC address of your print server and click the 
Configure button.

You can find the node name and MAC address by printing out the 
printer settings page. Refer to the Quick Setup Guide for information 
on how to print the settings page on your print server.

5

Enter the IP address, Subnet mask and Gateway (if needed) 
of your print server.

6

Click OK then select Close.

7

With the correctly programmed IP address, you will see the 
Brother print server in the device list.

If the print server is set to its factory default settings, it will not 
appear in the BRAdmin screen. However, selecting the 
Search Active Devices option will force the BRAdmin 
Professional utility to find the device as an unconfigured 
device.