Queue Server ; Change Bindery Queues; New Queue- Page 64

NOVELL NETWARE PRINTING 6 - 7

NC9100h_FM6.0

3

One or more Print/Fax servers will appear in the list (the default 
node names are 

BRN_xxxxxx

, where 

xxxxxx

 is the last six 

digits of the Ethernet address (MAC address)). 

4

Select the Print/Fax server that you wish to configure and 
double click it. You will be asked for a password. The default 
password is 

access

.

5

Select the NetWare tab. 

a

If it is not already selected, select Queue Server as the 
operating mode. 

b

Click the Change Bindery Queues button.

c

Select the NetWare server which you wish to configure.

d

Select the New Queue button and type in the queue name 
which you wish to create.

e

Once you have done that highlight the queue name you 
created and click on the Add button.

f

Click on Close and then OK.

Now exit the BRAdmin Professional utility. You are ready to print.

You can find the node name and MAC address by printing 
out the Network configuration page. For information on how 
to print the configuration page on your machine, see 
Resetting the Print/Fax Sever back to factory settings (Test 
Switch) on page 13-4.

If necessary change the Netware Print Server Name. The 
default NetWare Print server name will usually be 

BRN_xxxxxx_P1

 where 

xxxxxx

 is the Ethernet address of 

the Print/Fax server. Be careful! Changing the name may 
impact the configuration of other protocols because the print 
server service names will be altered.