匀吀䄀刀吀䤀一䜀 䄀一䐀 匀吀伀倀倀䤀一䜀 猀攀眀椀渀最; ∀匀吀䄀刀吀⼀匀吀伀倀∀ 戀甀琀琀漀渀; 䘀漀漀琀 挀漀渀琀爀漀氀氀攀爀- Page 26

23

Contents

Setting Up

Basic Sewing

Machine

Operation

Utility Stitches

Embroidering

Maintenance

Troubleshooting

Error

Messages

Sewing Chart

Patterns

(Programmed

in Machine)

Patterns

(Memory Card)

1. Place the fabric under the presser foot, lower the presser foot,

and then press the “START/STOP” button. The sewing ma-
chine starts sewing.

*

Adjust speed by sliding the speed control lever.

*

Sewing continues at low speed while the button is pressed.

2. And then press it once more to stop the machine.

Foot controller

CAUTION
Do not allow fabric pieces and dust to collect in the foot controller. Doing so could cause a fire or
an electric shock.

1. Turn the power off and plug the foot controller plug into the

jack on the back of the machine.

*

The foot controller can not be used during machine em-
broidery.

1

Foot controller

2

Foot controller jack

2. When the foot controller is depressed lightly, the machine will

run at a low speed.

*

The speed selected by the speed control lever on the body
of the machine will be the maximum speed of the foot con-
troller.

1

Faster

3. When pressure on the foot controller is released, the machine

will stop.

*

When the foot controller is being used, the “START/STOP”
button has no effect on the sewing.

Note (For U.S.A. only)
Foot controller: Model N5V
This foot controller can be used for sewing machine model PE-
300S.

1

2

“START/STOP” button

STARTING AND STOPPING SEWING

1