倀刀䔀匀匀䔀刀 䘀伀伀吀; 䌀栀愀渀最椀渀最 琀栀攀 瀀爀攀猀猀攀爀 昀漀漀琀; Always make sure to turn the machine off and unplug it when changing presser feet. If the power- Page 34
Brother PE-300S User's Guide
Table of Contents
31
CAUTION
Always make sure to turn the machine off and unplug it when changing presser feet. If the power
accidentally comes on, the machine might start running and bodily injury could result.
1. Push the “NEEDLE POSITION” button to raise the needle,
and then turn off the power.
2. Raise the presser foot lever.
3. Press the black button located at the back of the presser foot
holder to release the foot.
1
Presser foot holder
4. Place the presser foot pin directly below the holder-end and
lower the presser foot lever to attach the presser foot.
1
Holder-end
2
Foot pin
1
1
2
PRESSER FOOT
Changing the presser foot
Detailed Information for Brother PE-300S User's Guide
Lists of information found in Brother PE-300S User's Guide - Page 34
- 1. Push the “NEEDLE POSITION” button to raise the needle, and then turn off the power.
- 2. Raise the presser foot lever.
- 3. Press the black button located at the back of the presser foot holder to release the foot.
- 4. Place the presser foot pin directly below the holder-end and lower the presser foot lever to attach the presser foot.
Related Documents for Brother PE-300S User's Guide
All trademarks are property of their respective owners. Tightrope
Interactive