匀攀眀椀渀最 猀琀爀攀琀挀栀 昀愀戀爀椀挀猀; 䈀甀琀琀漀渀猀 琀栀愀琀 搀漀 渀漀琀 昀椀琀 椀渀琀漀 琀栀攀 最甀椀搀攀 瀀氀愀琀攀 ⠀伀搀搀ⴀ猀栀愀瀀攀搀 戀甀琀琀漀渀猀⤀; Sewing stretch fabrics ( )- Page 53

50

Contents

Setting Up

Basic Sewing

Machine

Operation

Utility Stitches

Embroidering

Maintenance

Troubleshooting

Error

Messages

Sewing Chart

Patterns

(Programmed

in Machine)

Patterns

(Memory Card)

Sewing stretch fabrics (   )

3

5

3

5

2. Lower the presser foot and start sewing.

*

Set the stitch width to match the diameter of the gimp
thread.

When sewing buttonholes onto stretch fabric, insert a gimp thread
into the buttonhole seam (buttonholes only).

1. Hook the gimp thread onto the end of presser foot “A”, insert it

into the groove at the front of the presser foot and temporarily
tie it there.

1

Upper thread

3. Once sewing is completed, pull the gimp thread gently to re-

move any slack, and trim any surplus length.

*

Trim and remove any threads sewn through the center of
the buttonhole with the seam ripper.

Buttons that do not fit into the guide plate (Odd-shaped buttons)

Use scale on the buttonholer foot to gauge buttonhole size.
Buttonholer scale is graduated in half centimetres.  Adjust size of
buttonholes on scale according to diameter + thickness of but-
tons.

1

Thickness [1 cm (3/8”)]

2

Diameter [1.5 cm (9/16”)]

3

Button holder plate

4

Scale

5

Diameter + thickness [2.5 cm (1”)]
[0.5 cm (13/64”) in one scale.]

6

0.5 cm (13/64”)

Example: For a button with a diameter of 1.5 cm (9/16”)

and a thickness of 1 cm (3/8”), the scale should
be set at 2.5 cm (1”)

1

1

2

3

4

5

6