䘀椀琀琀椀渀最 琀栀攀 攀洀戀爀漀椀搀攀爀礀 昀爀愀洀攀 琀漀 琀栀攀 ഀ攀洀戀爀漀椀搀攀爀礀 甀渀椀琀; 刀攀洀漀瘀椀渀最 琀栀攀 攀洀戀爀漀椀搀攀爀礀 昀爀愀洀攀; Fitting the embroidery frame to the embroidery unit- Page 80

77

Contents

Setting Up

Basic Sewing

Machine

Operation

Utility Stitches

Embroidering

Maintenance

Troubleshooting

Error

Messages

Sewing Chart

Patterns

(Programmed

in Machine)

Patterns

(Memory Card)

Fitting the embroidery frame to the embroidery unit

5

3

1

2

1. Raise the presser foot to its highest position. Then pass the

embroidery frame under the presser foot with the mounting
bracket on the left side and the fabric right side up.

2. Align the two pins on the embroidery unit frame holder with

the mounting bracket on the frame, and then press the frame
into the embroidery unit frame holder until a click is heard.

CAUTION
Always make sure to attach the hoop by both pins.
If the hoop is not firmly attached, it could mess up your
stitching.

1

Embroidery arm frame holder

2

Pins

CAUTION
Be sure to wait until the embroidery unit has finished initializing before fitting the embroidery
frame. (Refer to page 65.)

Removing the embroidery frame

5

3

1

2

1. While holding the frame with

both hands, pull the front of the
hoop up to lift it out of the front
pin.

2. Then pull the back of the hoop

up to lift it out of the back pin.

3. Raise the presser foot lever,

then pull frame out from under
foot.

1

2