25
TRIAL SEWING
1. When the machine is turned on, the straight stitch (left) is al-
ways selected.
2. Pass the thread underneath the presser foot and pull it out
from the rear of the machine by about 5 cm.
1
Upper thread
2
5 cm (13/64”)
*
Sewing can begin without pulling out the bobbin thread.
*
Use the J presser foot.
CAUTION
–
Be aware of the needle at all times while sewing, and keep your hands away from all moving
parts such as the needle, balance wheel and thread take-up lever, otherwise injury may result.
–
Do not pull or push the fabric too hard while sewing, otherwise injury may result.
–
Never use bent needles. Such needles can easily break, which could result in injury.
O
y [ W
y [ W
h
ª ⁄
Ł
L
fl
Ø
3. While pressing down on the thread and the fabric with your
left hand, turn the balance wheel with your right hand to lower
the needle to the sewing start position.
1
Thread
1
3
5
4
2
6
1
1
2