Interior Lamps; Instrument Panel Brightness Control; Courtesy Lamps- Page 111

2-42

If you turn off the ignition with the headlamp switch in
the parking lamp or headlamp position, the delayed
headlamp illumination cycle will not occur.

You can customize the vehicle to activate delayed
headlamp illumination when your vehicle’s ignition is
turned off under the conditions described above, or you
may choose not to activate this feature under any
conditions. You can turn the feature on and off when
you perform the following sequence:

1. Turn the ignition key to RUN.

2. Close all the doors.

3. Press and hold the power door lock switch. While

holding the door lock switch, cycle the headlamp
switch on and then off two times.

4. Release the power door lock switch. These steps

must be carried out in a time period of less than 
10 seconds, followed by a delay period of no more
than 10 seconds.

5. Then, press and hold the power door unlock switch.

While holding the door unlock switch, turn the
headlamp switch on and then off two times. Release
the courtesy door unlock switch. These operations
must be carried out in a time period of less than 
10 seconds.

After releasing the door unlock switch, a single chime
will be heard if the delayed headlamp illumination
function has been disabled; two chimes will be heard 
if the feature has been enabled. Disconnecting the
vehicle’s battery for up to a year will not change the
programmed operation of this feature.

Interior Lamps

Instrument Panel Brightness Control

You can brighten or dim the instrument panel lights by
moving the LIGHTS knob. If you turn the knob past
MAX, your courtesy or interior lamps will come on.

Courtesy Lamps

When any door is opened, several lamps come on. These
lamps are courtesy lamps. They make it easier to see as
you enter and exit your vehicle. You can also turn these
lamps on by twisting or turning the interior lights knob
all the way to the right.