Part C: Periodic Maintenance Inspections; Steering, Suspension and Front Drive Axle Boot and Seal Inspection; Exhaust System Inspection- Page 325

7-19

Part C: Periodic 
Maintenance Inspections

Listed in this part are inspections and services which
should be performed at least twice a year (for instance,
each spring and fall). You should let your dealer’s
service department or other qualified service center 
do these jobs. Make sure any necessary repairs are
completed at once.

Proper procedures to perform these services may be
found in a service manual. See “Service and Owner
Publications” in the Index.

Steering, Suspension and Front Drive 
Axle Boot and Seal Inspection

Inspect the front and rear suspension and steering
system for damaged, loose or missing parts, signs of
wear or lack of lubrication. Inspect the power steering
lines and hoses for proper hook

-

up, binding, leaks,

cracks, chafing, etc. Clean and then inspect the drive
axle boot seals for damage, tears or leakage. Replace
seals if necessary.

Exhaust System Inspection

Inspect the complete exhaust system. Inspect the body
near the exhaust system. Look for broken, damaged,
missing or out

-

of

-

position parts as well as open seams,

holes, loose connections or other conditions which could
cause a heat build

-

up in the floor pan or could let

exhaust fumes into the vehicle. See “Engine Exhaust” in
the Index.

Engine Cooling System Inspection

Inspect the hoses and have them replaced if they are
cracked, swollen or deteriorated. Inspect all pipes,
fittings and clamps; replace as needed. Clean the outside
of the radiator and air conditioning condenser. To help
ensure proper operation, a pressure test of the cooling
system and pressure cap is recommended at least once 
a year.